Page 8
5
Screw filling nozzle onto cartridge containing component A
Screw filling nozzle (C10) onto cartridge containing component A (C1).
6
Place cartridge containing component A into the bonding gun
Place cartridge containing component A (C1) into bonding gun (A).
Remove screw-on cap of mixing cartridge (C3).
7
Press component A into mixing cartridge
Place filling nozzle (C10) of cartridge containing component A (C1) into mixing cartridge (C3)
Use bonding gun (A) to press component A into mixing cartridge (C3).
8
Open nozzle fitting of cartridge containing component B
Use a knife to cut off the tip of the nozzle fitting of the cartridge containing component B (C2)
9
Screw injector nozzle onto cartridge containing component B
Screw injector nozzle (C7) onto cartridge containing component B (C2)
10
Place cartridge containing component B into bonding gun
Place cartridge containing component B (C2) into bonding gun (A).
11
Press component B into mixing cartridge with component A
Insert injector nozzle (C7) of cartridge containing component B (C2) into mixing cartridge (C3).
Use bonding gun (A) to press component B (C2) into mixing cartridge (C3) with component A.
12
Close mixing cartridge
Pull injector nozzle (C7) out of mixing cartridge (C3) and close mixing cartridge with screw-on cap.
This is a source reference. Confirm exact model applicability in the original material.