Page 1
Cruise Control Servo Cable: Adjustments
Adjusting cruise-control cable
Sequence 1-4
Sequence 5-7
1. Loosen snap ring 1 at adjusting piece 2 (displace it) and push threaded part 3 through along with cruise-control cable.
2. Engage cruise-control cable on cruise-control actuator and clip on adjusting piece 4 (bayonet lock).
3. Unscrew threaded part 5 until the accelerator plate is noticeably pulled.
4. Draw accelerator plate firmly back against its idle stop.
5. Push snap ring 6 back (fixing it).
6. Make fine adjustment by turning the threaded part 7.
Permissible play:
0 + 1 mm
.
This is a source reference. Confirm exact model applicability in the original material.