Page 1
Cabin Air Filter: Service and Repair
Particle Filter: Replacing The Filter Element
-
Replacing filter element (with and without carbon).
NOTE:
The particle filter is installed on the right in front of the heating/air-conditioning system!
Removing particle filter
1. Remove the cover for the heating and air-conditioning system.
2. In conjunction with telephone preparation, loosen the antenna at the two top fastening screws and unscrew the two bottom fastening screws.
Remove antenna part.
3. Remove the particle filter upwards out of the housing guide
-(arrow)-
.
Installing particle filter
1. Insert a new particle filter into the housing guide.
2. Check that the filter is correctly fitted and in the correct installation position.
3. Insert antenna part at the top, screw in both top and bottom fastening screws.
Tightening torque:
6 Nm (4.5 ftlb.).
This is a source reference. Confirm exact model applicability in the original material.