Page 1
Crankshaft: Specifications
Bolt For Bearing Housing M9x129
Initial Tightening
25 Nm
Final Tightening
1 x 90 degrees
Bolt For Crankcase Halves M6
Tighten
13 Nm
Bolts, Crankcase/Bearing Housing M9 x 95/160
Tighten
22 Nm
Crankshaft Endplay
New Installation
0.05-0.24 mm
Wear Limit
0.28 mm
This is a source reference. Confirm exact model applicability in the original material.