Group 0 · General / PAGE 101
Brake hoses and lines -GT3 Tyres -GT3 · Visual inspection for damage and routing Check the conditi
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Maintenance
Brake hoses and lines -GT3 Tyres -GT3
Visual inspection for damage and routing Check the condition and the tyre pressure
( corrosion)
Tyre condition
Tyres are a safety elementwhich fulfil the
demands placed on them only if they have theChecking the brake fluid level -GT3
correct air pressure and a sufficienttread depth.
Adjust the brake fluid level if necessary
The stated air pressures are minimumvalues(markings are on the brake fluid reservoir).
and must never be .fallenbelow, since in additionNever top up above the max. marking. Use
to the unfavourabledriving performance,thisonly Super DOT 4 brake fluid.
would bring about a risk of serious tyre damage.
Valve caps protect the valve from dust and dirt
and therefore from leaks. Always screw on the
caps tightly and replace missing valve caps.
For safety reasons, in addition to checking
the air pressure you should perform a visual
inspectionfor sufficient tread depth, foreign
bodies, pricks, cuts, cracks and bulges in
the sidewall (ply breakage).
Tyre pressure of cold tyres (approx. 200 C)
189_96
18-inch wheels
{summer and winter tyres}
front 2.2 bar {32 psi} overpressure
rear 2.7 bar {37 psi} overpressure
Drive shafts -GT3
Perform a visual inspection of the boots
for leaks and damage
03 20 00 Maintenance -GT3 03 -33
Printed in Germany -25, 1999 9960327
This is a source reference. Confirm exact model applicability in the original material.
