Oiling the door hinges GT3 Checking the function of the vehicle's · lights -GT3

Oiling the door hinges GT3 Checking the function of the vehicle's lights -GT3 Check the door locks, lid locks and safety hooks of the front lid to ensure that they Adjusting the main headlights are secure and functioning properly 1. Open the luggage compartment lid. Secure fit inspection 2. Removethe luggage compartment mat The fastening screws for the door lock, front on the wheel housingwall. lid lock and rear lid lock, as well as the retaining nuts for the upper parts of the locks of the front 3. Openthe coverfor the headlight and rear lids must be tightened with 10 Nm adjustmentscrews. (7.5 ftlb.), Functional inspection Door lock The door lock must engage in two stages through the locking wedge when the doors are closed and must disengage again when the door handle is operated (inside and outside), Lid lock, front and rear The lid locks must engage by insertion of the lock upper parts when the lids (front and rear) are closed and must disengage again when 8_96 the lid releases are pulled. 4. Cleanthe coverdisk and switchon the dipped Safety hook, front lid beamheadlights. The front lid must be held down by the safety 5. The vehicle must be on a horizontal surface. hook after the lid lock is opened. At the same Make the adjustmentwith the vehicle ready for time, the safety hook must engage in the driving (fuel tank full, driver's seat occupied retaining plate at its lowest point. by a person or 75 kg, the tyre pressure must Whenthe lid is open, the return spring must correspond to the stipulated values)using pull back the safety hook until it makes contact a headlight adjustmentunit. with the base plate of the lock upper part. 03 -34 03 20 00 Maintenance -GT3 9960327 Printed in Germany. 25, 1999