Engine -Crankshaft, pistons 911 Carrera (996) · Fitting pistons on cylinder bank 4 -6

Engine -Crankshaft, pistons 911 Carrera (996) Fitting pistons on cylinder bank 4 -6 Note The crankcase half of cylinder bank 4 -6 must be fitted before installation of the pistons. Installation 1. Thoroughlyclean sealing surface of the crankcase half of cylinder bank 1 -3. 2. Ensure that the profile seals on the oil guide and the two seals left and right of the coolant duct are seated correctly 561_98 3. Place centring mandrel,special tool 9645 on the receiving bore of the oil pump and turn the star knob clockwise until the centring mandrel is braced in the crankcase half (oil pressure builds up in centring mandrel). Q 511_98 4. Applya uniformbead of silicone approximately 1.5 mm wide to the cleaned sealing surface of the crankcase half of cylinder bank 4 -6 Instructions:see Group 10, Page 10 -36. I~