Installing pistons -GT3 · 8. Put cylinder in place

911 Carrera (996) Engine, crankshaft, pistons Installing pistons -GT3 8. Put cylinder in place Take the prepared cylinder and push it over the studs. Push the cylinder on until the two outer connecting rods can be mounted. Place the connecting rods in position and insert the piston pin. ~ ~ 15700007 , ,~~) 10. Insert central bushing Turn the engine in running direction until the central piston stands at bottom dead centre. Then place the central bushing in place and ~ ~ push it on until the bushing is guided by the studs. Ensure that the flattened areas on the 15700005 bushing point towards the neighbouring bushings. 9. Mountthe piston pin circlip. Mount the piston pin circlips of both pistons of the outer cylinders. Work through the opening in the cylinder for the central bushing. Ensure that the openings of the circlip always point towards the piston crown. Position special tool 9500/5 on the piston, guide it with one hand and press the circlip into place. Then check whether the circlip is sitting correctly in the groove. Then push the cylinder up to the spacers as far as it will go. Secure the cylinder againstfalling down. 15700010 13 20 23 13 -217