Engine, crankshaft, pistons 911 Carrera (996) · Installing pistons -GT3

Engine, crankshaft, pistons 911 Carrera (996) Installing pistons -GT3 11. Press the bushing into place. 12. Push the restraining strap away using two screwdriversand pull it out betweenthe Screw special tool 9659 on to two crankcase and the bushing. Then push the diagonally opposite studs. Lay a plastic bushing in as far as it will go. washer on the bushing and press the bushing into place on the piston by turning the handwheel. Then loosen the special tool again and turn the motor in running direction until the central piston can no longer be seen in the gap between the cylinder and the crankcase. Then press the bushing into place with the special tool until the restraining strap falls away from the piston. 12. Place the cylinder in position. Screw the cylinder retainer down. Ease the strain on the cylinder slightly and remove the spacers. Then push the cylinder towards the crankcase. 15700006 .3 -218 13 20 23 Installing pistons -GT3