Installing piston-pin circlip -GT3 · No. Procedure Instructions

Installing piston-pin circlip -GT3 No. Procedure Instructions 1 ~ Insert piston-pincirclip in the assemblyaid /' """ / Insert the circlip into assembly aid 9500/6 and push it \ I down until the circlip engages by itself. Attention must be \ paid to whether the piston-pin circlip is fitted in the piston from the left or from the right. / / /' 24460016 2 Position the assembly tool )( Positionthe assemblytool 9500/5 under assemblyaid \ I 9500/6. It must be ensured that the groove in the mounting aid is aligned with the milled cut in the assembly tool (see arrows). / "-.. 24460017 3 Press piston-pin circlip into the assembly tool. A " To do this, insert assembly aid 9500/3 into sleeve \ \ 9500/6 as shown in the figure, and then push it down swiftly. \ 24460018 ,-/~""'-"'{"l'"""'"