Installing piston-pin circlip -GT3 · No. Procedure Instructions

911 Carrera (996) Engine, crankshaft, pistons Installing piston-pin circlip -GT3 No. Procedure Instructions 4 Check position of the circlip. Ensure that the piston-pincirclip was not pressed in tilted \ in the assemblytool. It is necessaryto check whether the circlip has been fitted in the correct cutout, dependingon whether it is fitted from the left or from the right. Note: / Different insertion (see figure below)into the assemblyaids and in the assemblytool is necessaryI because this """" / /' dependson whether the circlip is inserted into the piston from the left or from the right. The left-handcolumn of the following illustration showsfitting from the left; the right-handcolumn showsfitting from the right. 24460019 13 -225 ~~