996 Carrera Group 1 – Part 2 Engine / PAGE 38
Immediatelyremove silicone material emerging Installing camshafts of cylinder bank 4 -6 · in the area of the camshaf
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive
Immediatelyremove silicone material emerging Installing camshafts of cylinder bank 4 -6
in the area of the camshaft closure cap. 1. Turn engine to installation position on
assembly support. Remove fixing pin.
19. Removeholding-downdevice 9624 from Advance crankshaft 3600 clockwise until
the cylinderhead. the bore 1 aT (top dead centre) in the belt
pulley is aligned with the fixing bore on
the crankcase. Position or fix with fixing
pin (short) of special tool 9595.
1.1 Turn engine 900 counterclockwiseon
the assemblysupport until cylinder
bank 4 -6 faces up.
721~7
Note
Fine adjusbnent of the camshafts is performed
after installation of the camshafts in cylinder
bank 4 -6.
497_96
15 05 22 Installing camshafts 15 -33
Printed in Germany -10. 1998 9961527
This is a source reference. Confirm exact model applicability in the original material.