996 Carrera Group 1 – Part 2 Engine / PAGE 55
11. Removedrive plate. Connect sprocket · wheel and chain with a tie wrap (installation position). With a second tie wrap suspe
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive
11. Removedrive plate. Connect sprocket
wheel and chain with a tie wrap (installation position). With a second tie wrap suspend ~ ,-'"
the sprocket wheel and chain to the side
I~ under slight tension.
~ ~~ "
@
246_97 r G-I
15. Lift out valve tappets with a magnet.
16. Detach guide for valvetappet. Undothe
pan-headscrews (15 ea.) from the outside ~~~_:./ I~ to the inside, and remove the guide.
500_96
12. Detach two bearing saddles. Lever bearing
saddles out of the guide sleeves.
13. Removeholding-downdevice (special tool
9611) from the camshafts.
14. Carefully lift the 'complete unit, camshafts
with chain and tensioning element out of
the cylinder head. The chain must not
jump over.
659_97
15 59 22 Removing valve tappets of cylinder bank 1 -3 15 -53
Printed in Germany -10, 1998 9961551
This is a source reference. Confirm exact model applicability in the original material.