15 59 24 Installing valve tappets · 1. Check guide for damage.

911 Carrera (996) Engine -Cylinder head, valve drive 15 59 24 Installing valve tappets 1. Check guide for damage. Refer to: Checking guide for valve tappet, ServoNo. 15 5902 I'\~~ 2. Fit guide. Tighten pan-headscrews (M6 x 35) from the inside to the outside. Tightening torque 10 Nm (7.5 ftlb.) I 3. Lightly oil the valve tappet and fit it in y,,\ the guide. r 4. Lay the complete unit, camshafts with chain and tensioning element in the cylinder head. 218_97 The groove or tab of the camshaft position sensor cover must face upward 6. Check dowel sleeves (4 ea.) of the bearing If the allocation should be uncertain, e.g. saddles to ensure that they are properly chain jumped over, reallocationis necessary. seated in the cylinder head. Refer to: Completing camshafts, Oil bearing surface. Fit bearing saddles in ServoNo 1505 33. the correct position and tighten evenly. Tighteningtorque 10 Nm (7.5 ftlb.) hi ~'" - r-i \;\; ~ g@ Q @ 246_97 401_1_96 E = Bearing saddle for inlet camshaft 5. Special tool 9611; fit holding-downdevice for A = Bearing saddle for exhaust camshaft camshafts. Fit auxiliary screws M6 x 45 with 7. Fit tensioning element(VarioCam). washers and tighten to 10 Nm (7.5 ftlb.). Tighten 3 M6 x 95 pan-headscrews. Tighteningtorque 10 Nm (7.5 ftlb.) 15 59 24 Installing valve tappets 15 -55 Printed in Germany -10, 1998 9961555 I~'I~