996 Carrera Group 1 – Part 2 Engine / PAGE 61
15 59 22 Removing valve tappets of cylinder bank 4 -6 · 1. Removefixing pin.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive
15 59 22 Removing valve tappets of cylinder bank 4 -6
1. Removefixing pin.
Turn crankshaft clockwise until the bore 1 aT
(top dead centre) in the belt pulley is aligned
with the fixing bore on the crankcase. Position
or fix with fixing pin (short) of special tool
9595.
View from the belt pulley side 624_97
3. Turn engine by 900 on assembly support
until cylinder bank 4 -6 faces upwards.
4. Unscrewchain tensioner of cylinder bank 4 -6.
497_96
2. Check camshaft adjustment at cylinder
bank 4 -6:
The groove in the camshaft must face
inward toward the crankcase.
672-97
5. Removeclosure cap from tensioning element
(VarioCam).Hexagon-headbolts M6 x 20
(2 ea.).
15 59 22 Removing valve tappets of cylinder bank 4 -6 15 -61
Printed in Germany -10, 1998 9961561
This is a source reference. Confirm exact model applicability in the original material.