996 Carrera Group 1 – Part 2 Engine / PAGE 64
15 59 24 Installing valve tappets · 1. Check guide for damage. 5. Special tool 9611; fit holding-d
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cylinder head, valve drive
15 59 24 Installing valve tappets
1. Check guide for damage. 5. Special tool 9611; fit holding-downdevice for
Refer to: Checking guide for valve camshafts. Fit auxiliary screws M6 x 45 with
tappet, ServoNo. 15 5902 washers and tighten to 10 Nm (7.5 ftlb.).
2. Fit guide.
Tighten pan-headscrews (M6 x 35) from
the inside to the outside.
Tighteningtorque 10 Nm (7.5 ftlb.)
3. Lightly oil the valve tappet and fit it in
the guide.
4. Lay the complete unit, camshafts with chain
and tensioning element into the cylinder head.
The groove or tab of the camshaft position
sensor cover must face downward.
218_97
~
~
243_97
15 59 24 Installing valve tappets 15 -65
Printed in Germany -10, 1998 9961565
h!:)~
This is a source reference. Confirm exact model applicability in the original material.