Installing bracket for oil cooler -GT3 · No. Procedure Instructions

Installing bracket for oil cooler -GT3 No. Procedure Instructions 1 Applyingsealant. Apply a thin coat of sealant (Drei Bond 1209) on the cleaned sealing surface. The sealant layer must not be too thick. Sealant must not enter the oil or coolant circuit. 2 Inserting oil return line, Replacea-ring on the oil return line and insert the oil return line into the oil cooler bracket. Positionthe bracket on the crankcase at the same time. 3 Fasteningbracket for oil cooler. Tighten the four bracket fastening screws to 9.7 Nm (7.0 ftlb.). Tighten the fastening screws on the flange between the bracket and oil filter to 9.7 Nm (7.0 ftlb.). 1767 23