996 Carrera Group 1 – Part 2 Engine / PAGE 255
Installing bracket for oil cooler -GT3 · 4 Screwingon hose fastening of the coolant line.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Lubrication
Installing bracket for oil cooler -GT3
4 Screwingon hose fastening of the coolant line.
Tightenthe coolanthose fastening betweenthe generator
bracket and oil cooler bracket to 9.7 Nm (7.0 ftlb).
099_i_99
5 Screwingon banjo bolt of the oil line and screwing on hose
fastening.
Put on the banjo bolt of the oil line with two new seal rings
and tighten to 30 Nm (22 ftlb). Put on the hose fastening
again and tighten to 9.7 Nm (7.0 ftlb.).
6 Fasteningcoolant line
Push on the coolant line between the coolant guide housing
and oil cooler bracket and tighten the hose clamp again.
099-9_99
17 -93
This is a source reference. Confirm exact model applicability in the original material.