17 07 19 Removing and installing oil temperature sensor -GT3 · Removing oil temperature sensor

911 Carrera (996) Engine -Lubrication 17 07 19 Removing and installing oil temperature sensor -GT3 Removing oil temperature sensor 1. Remove the air cleaner assembly. Unscrew hexagon-head bolt M6 x 34. Undo the hose clamp on the throttle body. Pull off plug from hot film mass air flow sensor and remove air cleaner assembly. ~::: '--0(( 059_99 - 3 Removeair-conditioningcompressor (Serv. No.: 87 34 19). Removecompressor from the bracket for the generator. Unscrewthe three screws for this purpose. Disconnectthe electrical connection on the compressor. Lift the compressor out of the engine compartment and lay it aside with 58_99 the leads still connected. Protect the body from damage with a cover. 2. Remove hydraulicpump. Undo the three hexagon-headbolts on the servo pump by approx. one halfturn. Remove drive belt. Removeservo pump pulley. Unscrewfastening screws on the reservoir (two M8 screws) and four screws (three M8 screws and one M6 screw) on the hydraulic pump. Pull the expansiontank with hydraulic pump and connected lines up out of the fastening bracket and lay aside to the right-handside. 061_99 1707 19 Removing and installing oil temperature sensor -GT3 17 -97p-,~