Engine -Cooling 911 Carrera (996) · No. Procedure Instructions

Engine -Cooling 911 Carrera (996) No. Procedure Instructions 7 Undo engine carrier Undo four fastening nuts with socket wrench insert (special tool 9614). Unscrewthe upper two hexagon nuts only as far as the end of the thread. Removethe lower two hex- agon nuts. Unscrewcentring screw (M6). Swivel engine car- rier to the rear. 8 Loosen coolant pump Undo hexagon-headbolts. The lower right hexagon-head bolt is difficult to reach. To undo it, use flexible-head socket wrench 4001 -10 from Messrs. Stahlwille.Guide the coolant pump out, taking care not to damage the pump vanes and sealing surface. 19 -14 19 50 19 Removing and installing coolant pump (engine installed)