996 Carrera Group 1 – Part 2 Engine / PAGE 282
No, Procedure Instructions · 4 Removedrive belt
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine-Cooling
No, Procedure Instructions
4 Removedrive belt
Slacken belt by turning the tensioning pulley (wrench size
24 mm) clockwise, hold still and simultaneouslytake the
belt off the drive pulleys and set aside.
5 Remove catalytic converter of cylinder bank 1 -3
Undo the catalytic converter of cylinder bank 1 -3 at the
exhaustmanifold. Unplug oxygen sensor cable and unclip.
Removethe holding clamp between the catalytic converter
and support sheet and undo the two exhaustclamps. Take
catalytic converter off of the exhaust manifold,pull out of
end muffler.
6 Secure catalytic converter
Turn the catalytic converter and tie in place as shown in
the illustration. Cover body to protect from damage.
This is a source reference. Confirm exact model applicability in the original material.