996 Carrera Group 1 – Part 2 Engine / PAGE 287
Engine -Cooling 911 Carrera (996) · Installing coolant pump -GT3
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
Engine -Cooling 911 Carrera (996)
Installing coolant pump -GT3
No. Procedure Instructions
1 Insert new metal seal
Removeold seal carefully,clean and degrease the I \ sealing surfaces. Insert new metal seal for coolant
pump and water guide housing.
\\ I
/
2 Mount coolant pump
Put on the coolant pump carefully through the support
plate. The impeller and the seal must not be damaged
during this procedure.
3 Install coolant pump
Position new seal and coolant pump simultaneouslyand
fasten. Observethe different screw lengths. Tighten
screws in diagonallyopposite sequence.
Tighteningtorque: 10 Nm (7.5 ftlb.)
'""'"~"'\
This is a source reference. Confirm exact model applicability in the original material.