996 Carrera Group 1 – Part 2 Engine / PAGE 288
No. Procedure Instructions · 4 Push on coolant hose
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cooling
No. Procedure Instructions
4 Push on coolant hose
Push on the coolant hose between the coolant expansion
tank and coolant pump on the pump neck. Fasten
spring-bandclamp with the commercially available
pliers No. 72 or 73.
5 Install catalytic converter
Install the catalytic converter of cylinder bank 1 -3
with a new manifoldseal. Screw holding clamp and
exhaustclamps into horizontal position if possible.
Use new nuts on the exhaustmanifold.
Push on and clip in oxygen sensor cable.
6 Fit and tension the drive belt
Fit the drive belt in the old running direction on all belt
pulleys and tension. Observe the order for fitting. It is
absolutely necessary to check that the drive belt
is correctly seated on all belt pulleys.
See Servo No.: 13 78 19
This is a source reference. Confirm exact model applicability in the original material.