Installing housing for coolant guide -GT3 · No. Procedure Instructions

911 Carrera (996) Engine -Cooling Installing housing for coolant guide -GT3 No. Procedure Instructions 1 Position housingfor coolant guide. Replace the four O-rings on the two connection fittings, grease lightly and insert. Position the housing for coolant and fit the three upper hoses on the coolant pump. Then fit the engine carrier again. To do this, insert the engine carrier in the studs of the engine mounts and then swivel towards the engine. 2 Tighten enginecarrier. Screw on the four fastening screws and tighten to 65 Nm (48 ftlb.). Tighten the engine mounts on the left and right to 85 Nm (63 ftlb.). 3 Remove engine support. Carefully remove special tool 9111/3, 19550019 "-. 1955 23 Installing housing for coolant guide -GT3 19 -61