Installing housing for coolant guide -GT3 · No. Procedure Instructions

911 Carrera (996) Engine -Cooling Installing housing for coolant guide -GT3 No. Procedure Instructions 13 Installingdrivebelt. Fit the drive belt on all pulleys. Put on the servo pump pulley with the drive belt and position the three fastening screws. Tensionthe drive belt on the tensioning roller. It is absolutelynecessaryto check that the drive belt is correctly seated on all belt pulleys. (Serv. No.: 13 78 19) 14 Tightenbelt pulleyon the hydraulicpump. Tighten the three fastening screws on the belt pulley of the hydraulic pump to 23 Nm (17 ftlb.). ~===/ r 19550007 15 Install air cleaner assembly. Place the air cleaner assembly in the engine compartment. Align the throttle body and tighten the clamps on the left and right of the throttle body again. Tighten the clamp on the connecting sleeve. Push on the plug of the hot film mass air flow meter and tighten the M6 x 34 hexagon-head bolt to 9.7 Nm (7.0 ftlb.). 1955 23 Installing housing for coolant guide -GT3 19 -65