Engine -Cooling 911 Carrera (996) · Installing housing for coolant guide -GT3

Engine -Cooling 911 Carrera (996) Installing housing for coolant guide -GT3 No. Procedure Instructions 10 Installgenerator. Place the generator onto the bracket for the generator again. Position the rear left fastening screw and the front right screw. Tighten the two screws to 46 Nm (34 ftlb.). Connect the B+ terminal again and tighten the nut to 15 Nm (11 ftlb.) 11 Install catalytic converters, Push on the connecting sleevesagain. Align the connecting sleevesso that the slot in the sleeve directly covers the arrow on the connector tube of the end muffler. First fit the catalytic converter of cylinder bank 1-3. Fit the catalytic converters with new gaskets. Tighten the three nuts on the exhaustmanifoldto 30 Nm (22 ftlb.) Insert oxygen sensors and clip in the cable again. ./ / 19550010 12 Install holder for oil filter. Push in the holder in downward direction. Position the four fastening screws and tighten to 9.7 Nm (7.0 ftlb.). 19550011"""'"---~