996 Carrera Group 1 – Part 2 Engine / PAGE 324
19 78 19 Removing and installing temperature sensor for coolant -GT3 · 1. Remove air filter.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Engine -Cooling
19 78 19 Removing and installing temperature sensor for coolant -GT3
1. Remove air filter.
Unscrew hexagon-head bolt M6 x 34. Undo
the hose clamp on the throttle body. Pull off
plug from hot film mass air flow sensor and
remove air cleaner assembly.
.-=
@
::::::::::-~
427_99
3. Removetemperature sensor.
Disconnectelectrical connection and set
to one side. Unscrewtemperature sensor
(aft 22). Collect emerging coolant it necessary.
58_99 _J
2. Removegenerator (Serv. No.: 27 22 19). ~
Unscrew B+ wire of battery. Relievedrive belt
and remove from the idler pulley. Unscrewthe
left fastening screw of the generator. Unscrew
the right fastening screw by approx. 1 cm and
tap with the hammer until the screw head makes contact again. Then unscrewthe right '"
fastening screw. Lift the generator out.
405_99
197819 Removing and installing temperature sensor for coolant -GT3 19 -67
" 1aaa QQ"1Q""~,r~//,/~
This is a source reference. Confirm exact model applicability in the original material.