Engine -Cooling 911 Carrera (996) · Installing temperature sensor for coolant -GT3

Engine -Cooling 911 Carrera (996) Installing temperature sensor for coolant -GT3 1. Install temperature sensor. Fit temperature sensor with a new sealing ring and screw in. Tightening torque 25 Nm (19 ftlb.). Connect electrical connection again. /" - 427_99 3. Install air cleaner assembly. Insert air cleaner housing in its holder again. Tighten the M6 x 34 hexagon-head bolt to ~ 9.7 Nm (7.0 ftlb.) Tighten the hose clamp on the throttle body and push the plug onto the 405_99 hot film mass air flow sensor. 2. Install generator (Serv. No.: 27 22 19). 4. Check coolant level, top up if necessary. Move the generator into installation position. Tighten the engine mounts on the left and right to 46 Nm (34 ftlb.). Connect the B+ wire again and tighten the nuts to 15 Nm (11 ftlb.) Fit and tension the drive belt. }l