Front wheel suspension, drive shafts 911 Carrera (996) · 4. Place the wheel-carrier/spring-strutassembly Note

Front wheel suspension, drive shafts 911 Carrera (996) 4. Place the wheel-carrier/spring-strutassembly Note into the vehicle. The three unused bores in the spring strut mount are intended only for driving on racing circuits. The three fastening bolts (M8)are fitted in these holes in this case. This increasesthe negativecamber. 40850016 5. Note the installed position of the spring strut mount. Outer side (A}/inner side (B). The shock-absorberpiston rod is thereby A -Outside of vehicle 40850015 shifted outwards. Use new fastening nuts. B -Inside of vehicle Before tightening the fastening nuts, adjust 6. Fit brake caliper on wheel car~ier. Replace spring strut mount in accordance with the fastening screws. Tighteningtorque 85 Nm applied marking (position of the three collar (63 ftlb.). nuts). Fasten holder for brake line/brake hose on wheel carrier. Note The brake caliper fastening screws -on the front and rear axles -are 5 mm longer with the GT3. The screws are also different colours. 911 GT3 = red (77 mm long) 911 Carrera (996) = silver (72 ~m long)