No. Designation Qty. Removal Installation · 1 Fastening nut 1 Before loo

911 Carrera (996) Front wheel suspension, drive shafts Note: No. Designation Qty. Removal Installation 1 Fastening nut 1 Before looseningthe Use new fastening nut. M 14x 1.5 fastening nut, tension Tighten to 80 Nm coil spring with the spring (59 ftlb.) clamp. Counter at the piston rod when looseningthe nut 2 Stop plate 1 Mount in correct position (No.2 and No.4 are identical parts) 3 Spring strut mount 1 4 Stop plate 1 Mount in correct position (No.2 and No.4 are identical parts) 5 Mount 1 Removethe mount from Make sure it is seated back-upring No. 5a only properly in the spring when replacing the mount, strut mount No 3 otherwise the mount could come off 5a Back-upring 1 6 Spring plate 1 Observeallocation (compensationpart) (Page 40 -11). Join in correct position with back-upring 7 Cup washer 1 Mount in correct position 8 Additionalspring 1 Mounton protective bellows (No.9) 9 Protectivebellows 10 Coil spring 1 Observe allocation as per Spare Parts Catalogue 11 Vibration damper 1 Observe allocation as per Spare Parts Catalogue. The vibration dampersfor the right and left sides are identical parts 40 Disassembling and assembling front spring strut 40 -9 Printed in Germany. 21, 1999 996407