Front wheel suspension, drive shafts 911 Carrera (996) · Disassemblyand assembly instructions

Front wheel suspension, drive shafts 911 Carrera (996) Disassemblyand assembly instructions Disassembly Preliminary work and notes on assembly Tensionthe coil spring with the spring clamp Replace nut for fastening the piston rod on until the piston rod is relieved. the spring strut mount. It is recommendedto replace the coil springs only in pairs. Note If the coil springs are exchanged,it might be necessaryto use a different spring plate than before. The following spring plates (compensationparts) are available: Allocation of the spring plate according to the coil spring tolerance group (see P. 40 -11). 1 green line = 6.5 mm thick compensatiol1lpart. ;74_96 1 white line = 3.0 mm thick compensatioltlpart. To undo the connecti (piston rod to spring strut mount) counter at the piston rod with special tool 9630 or a 7-mm Allen key.e Important: Never us an impact bolter to loosen or tighten the fastening nut. Removeall parts from the pistonrod. Note When installing new parts, observe the allocation according to the Spare Parts Catalogue. 676_1_96 40 -10 40 Disassembling and assembling front spring strut 996407 Printed in Germany -21, 1999 on