No. Designation Qty. Removal Installation · Wheelhub 1 Press out with pre

Note: No. Designation Qty. Removal Installation Wheelhub 1 Press out with pressure Press in under a hydraulic piece P 297 A under a press. hydraulic press. For this To do this, place the purpose, use the separator wheel hub on the wheel and correspondingshims centring device and press for support it on the wheel bearing inner race using pressure piece VW415 A 2 Hexagon-headbolt (10.9) 4 Tighten to 37 Nm (27 ftlb.) 3 Lid 1 Fit in correct position (groove down) 4 Wheelbearing 1 Heatwheel bearing housing Heat wheel bearing to approx. 1000 C housingto approx. (max. 1200 C). 1000 C (max. 1200 C) Press out wheel bearing Insert new wheel bearing with tubular piece in correct position VW415 A (tool C) (inscriptionfacing the wheel hub), and then press again slightly using pressure piece 9247/4 (tool 0) and tubular piece VW415 A (tool C) 40 57 19 Removing and installing front wheel bearing 40 -15 Printed in Germany -21, 1999 9964013