Front wheel suspension, drive shafts 911 Carrera (996) · Notes on removal and installation

Front wheel suspension, drive shafts 911 Carrera (996) Notes on removal and installation Note Remove retainer plate (lid / four screws) and The wheel bearing is removed and installed with brake disc cover. the wheel bearing housing removed. Heat wheel bearing housing to approx. Removal 1000 C (max. 1200 C). Press out wheel bearing with tubular piece -Remove brake disc and speed sensor. VW415 A (tool C). Press out wheel hub with pressure piece P 297 A (tool A). Use the separator (tool B) for support. If there is not enough space for the wheel ~.A hub between the press, appropriate shims ~ will additionallybe necessary. c A 25_99 Press inner wheel bearing race off the B wheel hub (Figure 426_97). To do this, use pressure piece P 297 A (tool A) in combinationwith the separator (tool B). 24_99 Note First pull the inner bearing race several millimetres off the wheel hub (Figure 741_97) so that the separator can be put into place. For this purpose, use a two-claw puller in combinationwith a suitable pressure piece (e,g. VW433). 40 -16 40 57 19 Removing and installing front wheel bearing 9964013 Printed in Germany -21, 1999 ,-=