996 Carrera Group 4 Running Gear / PAGE 47
(~"'~,-=,. · £.1
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Front wheel suspension, drive shafts
c
(~"'~,-=,.
£.1 'I
D '""' "'-""-~ ",- ".
!"-""-"-;;-.;.-:~~
741_97 26_99
Fit brake disc cover and retainer plate (lid).
Unlessthere is a water drain on both sides,
fit the water drain (arrow) in the correct
position -i.e. facing downward.
Use correct tightening torques.
Brake disc cover = 10 ~m (7.5 ftlb.)
Retainerplate = 37 Nm 1(27ftlb.)
426_97
Installation
-Before installation,clean the bore in the
wheel bearing housing and remove any
surface irregularities with a polishing cloth.
Heat wheel bearing housing to approx.
1000 C (max. 1200 C). 35_99
Insert new wheel bearing, and then press
again slightly using pressure piece 9247/4
(tool 0) and tubular piece WV415 A (tool C).
40 57 19 Removing and installing front wheel bearing 40 -17
Printed in Germany -21, 1999 9964013
This is a source reference. Confirm exact model applicability in the original material.