Tension coil spring with spring clamp. Place the spring strut mount (assembly of · spring strut mount / intermediate

911 Carrera (996) Rear wheel suspension, drive shafts Tension coil spring with spring clamp. Place the spring strut mount (assembly of spring strut mount / intermediate part / Clamp eye of vibration damper in the vise spring plate) onto the piston rod so that the (use jaw liners). end of the coil spring lies against the stop of the spring plate. Assembly -Place pre-tensionedcoil spring on the vibra- tion damper. Slide the protective tube/additional spring as- sembly on the piston rod. Slide the washer No.7 and stop plate No.6 (No.6 in correct position)as far as they will go onto the piston rod. 156 -97 Place stop plate in the correct position on the spring strut mount. Screw new fastening nut onto the piston rod until approx. 1 to 2 threads are visible above the fastening nut. 155 -97 157 -97 42 Disassembling and assembling rear spring strut 42 -13 Printed in Germany, 1997 996427