Press intermediate part (compensation part Distinguishing feature of coil springs and · No.4) into the spring plat

Press intermediate part (compensation part Distinguishing feature of coil springs and No.4) into the spring plate (No.5) in the cor- dampers rect position (not twisted) and complete with the mount (No.3). In the correct position means: None of the 7 cutouts IA) must be free on the spring plate (No.5). 154 -97 153 -97 A = Identificationof the running gear version (spring constanVspring length) by two differ- Fit protective bellows on additional spring. ent colored lines (for exampl~,1 x brown and 1 x yellow). Observe the correct allocation (runninggear Refer to the Parts Cataloguefor the allocation. version)when installing new springs and/or dampers. B = Identificationof the coil spring tolerance group (load group) for determination of the compensationpart (spring plate) thickness. 1 white line = 0.5 mm thick compensationpart. 1 green line = 4.0 mm thick compensationpart. C = Colour dot (colour label)to differentiate the damper identifier. Brown dot = Standard running gear, RoW/USA Green dot = Sport-typerunninggear, RoW Grey dot = Sport-typerunninggear, USA 42 -12 42 Disassembling and assembling rear spring strut 996427 Printed in Germany, 1997