0) -7/( · .v "" I {

911 Carrera (996) Rear wheel suspension, drive shafts i~~1 0) -7/( .v "" I { \ /" x 741_97 427_97 Fit retainer plate (lid). Uhlessthere is a water drain on both sides, fit the water drain (arrow) in the correct position -i.e. facing downward. Observetightening torque: 37 Nm (27 ftlb.) 426_97 Installation -Before installation,clean the bore in the wheel bearing housing and remove any surface irregularities with a polishingcloth, 424_97 Heat wheel bearing housing to approx. 1000 C (max. 1200 C). Insert new wheel bearing, and then press again slightly using pressure piece 9247/3 (tool D) and tubular piece WV415 A (tool C). 42 58 19 Removing and installing rear wheel bearing 42 -19 Printed in Germany -21, 1999 9964215 ""?)