996 Carrera Group 4 Running Gear / PAGE 80
2. Greasethe toothingof the drive shaftwith 5. Performa suspensionalignmentafter · OptimolyHT.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
2. Greasethe toothingof the drive shaftwith 5. Performa suspensionalignmentafter
OptimolyHT. installation.
Note
Onlyoptimised axle nuts -version B -for drive
shaft fastening are availablefrom the Parts
Service.
B A
A -Single-part fastening nut 42210006
B -Two-part fastening nut
(moveable washer/arrows)
SP No. 999 084 640 02 (status 09/99)
3. Fitthe brakecaliper.Replacefastening
screws. I
4. When installing the wheel carrier and
tightening both the upper control arms, make
sure that the spring strut fastening screw and
the upper control arm fastening screws are
only tightened in vehicle position.
Vehicle position means: Vehicle standing on
the wheels, or the wheel suspensionis being
raised with a universallift.
Note
A calibration of the angle sensor of the headlight
beam adjustment is not necessary.
42 -26 42 52 19 Removing and installing wheel bearing housing (wheel carrier)
9964223 Printed in Germany -33, 1999
This is a source reference. Confirm exact model applicability in the original material.