11. Loosen the outer ends of both upper arms Installation · and remove the screws.

911 Carrera (996) Rear wheel suspension, drive shafts 11. Loosen the outer ends of both upper arms Installation and remove the screws. 1. Install in reverse order. B~fore installing, visually inspect all parts. Replaceself-lockingnuts. Use correct tightening torques. Note When replacing wheel bearing housings(wheel carriers), pay close attention to the correct allocation. It is only permissible to install identical wheel bearing housings(wheel carri~rs) -short or long steering arm (dimensionX = approx. 124 tnm or approx. 147 mm) -on one vehicle! 42350001 Use of wheel carriers with the long steering arm -in production -partly in the current model 12. Removethe ball joint from the control arm year 1999 (X), but generally as of model year (lower arm). 2000 (Y). For pressing off the ball joint, use special tool!9560. Wheelcarriers with a long steering arm - dimension X = approx. 147 mm -can be 13. Loosen the spring strut on the wheel carrier installed retroactivelyin pairs. (arrow) and remove the wheel carrier. For a detailed explanation-f<i'r instance, parts which must also be used when converting a wheel carrier with a long steering arm -see under "Replacingwheel carriers (after installation)", 180_97 x -Length of the steeringarm 42 52 19 Removing and installing wheel bearing housing (wheel carrier) 42 -25 Printed in Germany -33, 1999 9964223