996 Carrera Group 4 Running Gear / PAGE 92
Installing right drive shaft · Install in reverse order.
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Rear wheel suspension, drive shafts
Installing right drive shaft
Install in reverse order.
Grease the toothing of the drive shaft with
OptimolyHT.
Carry out a visual inspection of all parts.
Replace self~ockingnuts.
Use correct tightening torques.
II
When installing the spring strut, make sure
that the spring-strutfastening screw -on the
wheel carrier -is tightened only in vehicle
position.
Vehicle position means: Vehicle standing on A -Single-part fastening nut 42210006
the wheels, or the wheel suspensionis being
B -Two-part fastening nut raised with a universallift.
(moveable washer/arrow)
Part No. 999 084 640 02 (status 04/00)
Note
Only optimised axle nuts -version B -for drive
shaft fastening are availablefrom the Parts
Service.
These two-part fastening nuts (M22) have a
moveablewasher (arrows).
Retrofitting is possible for all 911 Carrera (996)
vehicles and for all Boxsters.
42 21 19 Removing and installing drive shaft (Tiptronic transmission) 42 -39
Printed in Germany -39, 2000 9964231
This is a source reference. Confirm exact model applicability in the original material.