1. Clamp wheel, 5. Put the assemblyhead o~ the rim flange. · Positionthe assemblyaid.!The

911 Carrera (996) Wheels, tires, suspension alignment Removal 1. Clamp wheel, 5. Put the assemblyhead o~ the rim flange. Positionthe assemblyaid.!The mountinglever 2. When pushing off the tyre, ensure that the is pushed into the deep b~d underneaththe bead press-offtool is set to the exact inch first tyre bead, and then ~uided over the graduation. If this is not the case, the rim assemblyshoe and pushe(j down. flange may be damaged by the press-off rollers. Note The mounting lever must be Ikept at a safe distance from the rim. This ijrevents damage (scratches, pressure marks)Ito the rim spokes, , ~:» 1\ \ \. " 435_99 3. The wheel must be turned anti-clockwisewhen pressing the tyre off the rim. Otherwise, 436_99 excessive forces occur on the fastening bolts of the machine which can lead to bolt 6. Lift the tyre bead out of the rim bed by breakage. turning the wheel to the right. The tyre beads can be pressed off at the same time or individually. 7. Positionthe assemblyaid Ifor the second tyre bead. Pull the tyre upwar~s and push it into 4. Before removing the tyre, coat the tyre bead the rim bed underneathth~ second tyre bead with mounting paste to facilitate removal. using the mounting lever. ! Make sure that the moun~nglever is guided correctly (see Point 5). Turn the wheel to the right and remove the tyre. 44 Tyre mounting for critical wheelsjtyre pairs 44 -29 Printed in Germany -39, 2000 9964427 ~~---