Wheels, tires, suspension alignment 911 Carrera (996) · 1. Free the wheel from the abraded rubber 5. Guidethe

Wheels, tires, suspension alignment 911 Carrera (996) Fitting 1. Free the wheel from the abraded rubber 5. Guidethe tyre bead through th~ assembly particles and check for damage. head. Fit the tyre bead in the ~eep bed by turning the wheel to the right. I 2. A new rubber valve must always be fitted. For wheels with steel valves (Turbo wheels), the valves can be reused if they are not damaged. The valves should, however, be replaced after every second tyre change or after 3 years at the latest. Note Do not use commerciallyavailablesteel valves. The Porsche valves are shorter (dimensionX, Figure46O_99). The Porsche version measures 43 mm. 437_99 6. At the start of the mounting P~ cess of the second tyre bead, the mountin arm should be positioned opposite to the alve. This preventsdamage to the valve. 1 7. Press the second tyre bead o~o the wheel as flat as possible and guide thro~gh the assemblyhead. 460_99 3. Coat the wheel and lyre with lyre mounting paste -TIP TOP Universal,order No. 593 0601 or Contifix. 4. Place the tyre in the correct position on the wheel. Push in mounting arm and position on top of the rim flange. 44 -30 44 Tyre mounting for critical wheelsjtyre pairs 9964427 Printed in Germany -39, 2000