996 Carrera Group 4 Running Gear / PAGE 163
46 83 20 Removing and installing the parking brake shoes · Note 3. Removeth
Read extracted page text
OCR can contain errors. Check the original page image for exact wording, warnings and specifications.
911 Carrera (996) Brakes -Brake mechanics
46 83 20 Removing and installing the parking brake shoes
Note 3. Removethe brake caliper from the wheel
carrier and suspend it in the wheel archThe following illustrations show the right-hand
(do not open brake hydraulics),side of the vehicle.
First, pull out the electrical wires on the
Removal brake caliper holder and the brake pad wear
wire on the wheel carrier holder.1. Removethe rear wheel.
Open the plug connection on the wheel carrier
4. Take off the brake disc after removing the
and pull out the plug for the brake pad wear
countersunk screws (arrows). If a stuck brake
indicator.
disc cannot be removed by gentle tapping
with a plastic hammer, evenly screw hexagon-2. With a screwdriver, turn the adjustment
head bolts into the two M8 threads of the device towards "release"through a wheel
brake disc, thereby pressing off the disc. bolt threaded hole.
/
l¥'
58_97 59_97
This is a source reference. Confirm exact model applicability in the original material.
