Brakes -Brake mechanics 911 Carrera (996) · 5. Removecompression springs (No. 10), 2. Install the act

Brakes -Brake mechanics 911 Carrera (996) 5. Removecompression springs (No. 10), 2. Install the actuating lever (spreading lever) adjusb-nentdevice (No.2) and return spring (No. 12), brake shoes, return springs, (No.4). Removeparking brake shoes and compressionsprings and adjustmentdevice. return spring (No.5). The spreading lever (No. 12) is a 1-part assemblythat cannot be disassembled. This assemblyconsists of part Nos. 6, 7 and 8. Note The hook (the curved end of the spring) of compression spring (No. 10) must point upward on the upper brake shoe and downward on the lower brake shoe (arrows I Figure 79_97), 3. Again check to ensure that the parking brake shoes, adjustment device, return springs, compression springs and spreading lever are positioned correctly, and adjust if necessary. Note Ensure that the hooks (curved spring ends) of the compressionsprings (No. 10) correctly clasp the wheel carrier A (if necessary,check with the aid of a mirror). Figure 586_97 shows the upper compression spring. 79_97 Installation 1. Lightly grease the adjustment device (No.2), pins (No. 8/No. 9.) on the actuating lever (spreading lever) and the sliding surfaces of the parking brake shoes. 586_97