6911 Targa Body-Equipment, Exterior · Section 5 Roof Frame – Glass Roof Panel Front Side

6911 Targa Body-Equipment, Exterior Section 5 Roof Frame – Glass Roof Panel Front Side 6_19_02 The roof join strip (3) with the lip seal is installed between the roof rail (1) and the glass roof panel (2). The tape (4) around the periphery assumes the sealing functions between the roof rail and the roof module (5). The rear lift unit (6) is installed at the bottom with the lift slide into the slotted track (7) and attached to the mounting plate (9) by means of the link (8). The frame for the glass roof panel (10) is bolted to the mounting plate. The guide bushing for the link is carried in the upper track (11). The upper channel is attached to the mounting frame (12) with blind rivets. The front cloth lining (13) is retained at the top in the clip track (14) and at the bottom in one of the grooves of the slotted track. The upper glass roof panel weatherstrip (14) and the lower weatherstrip (15) are installed in the roof panel frame. 2002 Service Training 6-17