6 Body-Equipment, Exterior 911 Targa · Section 6 Roof Frame – Glass Roof Panel Rear Side

6 Body-Equipment, Exterior 911 Targa Section 6 Roof Frame – Glass Roof Panel Rear Side 6_18_02 The trim surround (3) with the lip seal is installed between the roof rail (1) and the folding rear window (2). The trim surround is attached to the folding rear window frame (4). The tape (5) around the periphery assumes the sealing functions between the roof rail and the roof module (6). The reinforcing tube (7) is integrated in the roof rail. The glass for the folding rear window is bonded to the frame using adhesive (8) around the periphery. The weatherstrip (9) installed on the edge of the roof module forms a seal to the folding rear window. The ball head (10) for locating the gas-pressure strut is attached to the frame. The rear cloth lining (11) is retained at the top in the clip track (12) and at the bottom in one of the grooves of the slotted guide (13). The roof rail trim panel (14) conceals the lower area of the slotted track. The C-pillar trim (15) provides additional coverage. 6-18 Service Training 2002