6. Releaseclutch pedal switch by turning it 900 10. Undo fastening nuts from boost spring · and pull it out of the install

6. Releaseclutch pedal switch by turning it 900 10. Undo fastening nuts from boost spring and pull it out of the installationopening. bracket (arrows). Requirement: Boost spring secured with 7. There is an assembly bore in the guide rod a cotter pin. for the clutch boost spring. Insert a 3 mm 0 Remove clutch pedal lever together with cotter pin in this bore, and bend over the boost spring and bracket. ends (securing: refer to Figure478_98). 8. Removepin betweenthe clutchpushrod andclutchpedallever. 9. Removeretainer (1) on the pedal bearing axle. 478_98 11. Release stop light switch by turning it 900 and pull it out of the installation opening. 12. Disengagereturnspringfor brakepedal at the body. 13. Removepin between the brake push rod and brake pedal. 14. Undo lock nut (2) for fastening the steering outer tube C; refer to Fig. 48_98. Undo hexagon nut (3). Unscrew (remove) 48_98 pedal bearing axle (4). 15. Pullout brake pedal. To do this, tum the brake pedal and/or brake push rod accordingly.