Steering 911 Carrera (996) · Notes for sliding piece and airbag contact unit

Steering 911 Carrera (996) Notes for sliding piece and airbag contact unit 1. If sliding piece No.1 was pulled off steering Center position: First move contact unit shaft No.4, notch No.2 must point to the againstthe end stop. Turn contact unit two revo- tooth gap (No.3) on assembly. lutions back from the end stop and then con- tinue turning as far as the center position mark. The exact center position is indicated by the two arrows (No.1). Turn front wheels to straight-aheadposition before fitting the steering wheel (steering shaft mounted on steering gear). @ 134.96 ~ @ -. 2. If the steering wheel was not fixed before the steering gear was removed,the position of the contact unit (spiral spring) may no 1741-48 longer be correct. In this event, remove steering wheel and move 1 = Center position mark (arrows) contact unit to center position. 2 = Drivers that engage in the steering wheel If this is not done, the spiral spring may be damaged. 3 = Locking (securing againstturning), which becomes effective after removal of the steering wheel.