97.()92 612_1_97 · 6. Pull cover (collar) off the steering lock.

911 Carrera (996) Steering 97.()92 612_1_97 6. Pull cover (collar) off the steering lock. 11. Pull plug off ignition switch. Carefully unlock and separate the plug connection on the lock 7. Removesteering coloum switch cover (undo barrel (at the induction coil for the Torx screws, unclip the cover and lift it off). immobilizer). 8. Detach support of steering lock on the 12. Unlock the electrical plug connectionon the assembly. The support is fastened with a signal converter from above and disconnect. screw. Unclip the electrical wire on the steering lock The side nozzle must be removed housing. to allow access to this screw. This procedure is almost identical to the procecure -"Removing and installing main light switch" -refer to ServoNo. 9405 19 L~II (P. 94 -7). v~ The difference is that the electrical plug JL connection of the main light switch does not need to be disconnected. 9. Undo steering lock fastening screw. Unlock steering lock on the steering column (press spring~oadedpin with a scriber) and simultaneouslypull the steering lock out of the steering column. 10. On Tiptronic vehicles, remove (disengage) 96.529 the keylock cable on the steering lock 13. Removesteering lock from the vehicle. housing. First turn ignition key to position "1" (ignitionon). ~