6911 Targa Body-Equipment, Exterior · Section 9 Rear Center Section – Glass Roof Panel Rear Center

6911 Targa Body-Equipment, Exterior Section 9 Rear Center Section – Glass Roof Panel Rear Center 6_04_02 The glass (1) for the folding rear window is bonded to the frame (3) using adhesive (2) around the periphery. The rear trim surround (4) with sealing lip (5) consists of a shaped plastic bead. The tape (6) around the periphery assumes the sealing functions between the roof module (7) and the rear center section (8). The roof module is attached by the rear center section stud bolts (9). The weatherstrip (10) installed on the edge of the roof module forms a seal to the folding rear window. A plastic film (11) is bonded to the body in the area where the folding rear window rests. The striker (12) is bolted to the frame. The closing assist (13) is attached to a bracket and engages the striker in in the closed position. 2002 Service Training 6-21